Class III treatment with mini-implants anchorage in young adult patients: short and long-term results

ABSTRACT Introduction: Class III malocclusion should be intercepted and treated at early age, to prevent the necessity of future complex and expensive procedures. The orthopedic facemask therapy has the goal to achieve skeletal changes, minimizing side effects on dentition. The use of skeletal anchorage, combined with Alternate Rapid Maxillary Expansion and Constriction (Alt-RAMEC) protocol, may be effective in treating a greater number of growing Class III patients. Objective: To summarize the existing evidence-based literature on Class III malocclusion treatment in young adult patients, and to illustrate its application and effectiveness, by presenting an emblematic case report. Conclusion: The resolution of the present case, its long-term follow up, along with the studies conducted on a larger sample, demonstrate the effectiveness of the strategic combination of orthopedic and orthodontic treatments by using an hybrid rapid palatal expander and Alt-RAMEC protocol for treating Class III malocclusions in adult patients.

RESUMO Introdução: A má oclusão de Classe III deve ser interceptada e tratada em idade precoce, a fim de evitar uma futura necessidade de procedimentos complexos e invasivos. O tratamento com máscara facial ortopédica tem o objetivo de obter alterações esqueléticas, minimizando os efeitos colaterais na dentição. O uso de ancoragem óssea em mini-implantes, associada ao protocolo Alt-RAMEC (Alternate Rapid Maxillary Expansion and Constriction) pode ser eficaz no tratamento de um grande número de pacientes Classe III em crescimento. Objetivo: Realizar uma síntese da literatura baseada em evidência sobre o tratamento da má oclusão de Classe III em pacientes adultos jovens, e ilustrar sua aplicação e eficácia por meio do relato de um caso emblemático. Conclusão: A resolução e o acompanhamento em longo prazo do caso apresentado, juntamente com estudos conduzidos em uma amostra maior, demonstram a eficácia da combinação estratégica dos tratamentos ortopédico e ortodôntico usando um expansor palatal híbrido e o protocolo Alt-RAMEC para corrigir a má oclusão de Classe III em pacientes adultos.

Class I and Class II Patients Treated with Damon System: A Study of Transversal, Sagittal and Torque Values Variations

ABSTRACT Objective: To analyze the transversal and anterior-posterior changes obtained in patients treated only with the Damon system. Material and Methods: 51 patients with either class I or class II division 1 sagittal relationship treated with the Damon system and the same archwire sequence were retrospectively selected. Dental casts of each patient before (T0) and after treatment (T1) were scanned and analyzed using NEMOCAST 3D software. Inter-molar, inter first-premolar, inter-second premolar and inter-canine distances were measured in both upper and lower arches. Initial and final lateral cephalograms were traced using the OrisCeph program. Pre and post-treatment measurements were compared using the t-test for repeated measurements. The Pearson Correlation Index and Linear Regression Analysis were used to determine the dependence between continuous variables. The significance level was set at 0.05. Results: Transversal diameters in the upper arch increase statistically significantly, especially in the bicuspid area. Initial intra-arch diameter was the only statistically significant variable correlated with the final expansion obtained. A linear negative correlation between the initial latero-posterior torque and the final expansion was observed in both arches. Conclusion: Using identical arches in patients with very different initial characteristics, the changes in bicuspids' diameters remain the most predominant. Patients with initial more negative torque in the posterior region had a higher expansion amount.

Effectiveness of Fully Customized Lingual Orthodontic Treatment: A Retrospective Pilot Study

ABSTRACT Objective: To investigate the effectiveness of Suresmile® lingual therapy on torque, tip, and rotations measures through digital evaluation of planning and post-treatment digital models. Material and Methods: A sample of 12 Caucasian adult patients (4 men; mean age 30.6 years ± 3.9 and 8 women; mean age 31.4 years ± 4.5) treated with the Suresmile® lingual orthodontic technique was retrospectively selected, regardless of the type of malocclusion. Digital planning was performed with Suresmile® software, while lingual therapy was accomplished with interactive self-ligating lingual brackets and customized Suresmile® arches. First, digital models of planning and post-treatment digital models were compared using VAM software (and the discrepancies were analyzed through MANOVA and four multivariate. Then, Tukey and Bonferroni's post-hoc tests are performed. Results: The accuracy average values are 60.11 ± 27.67% for torque, 53.52 ± 27.37% for tip and 59.19 ± 26.42% for rotation, while for inaccuracy values are 2.72° ± 2.23° for torque, 2.98° ± 2.16°for tip and 3.58° ± 3.29° for rotation. No significant differences have been recorded evaluating different sectors of both arches. Conclusion: This retrospective preliminary study highlight how overcorrections, especially in the Suresmile lingual technique, should be performed during orthodontic planning. Moreover, the study gets bases for further, more structured future studies that should involve larger and more homogeneous samples.

Comparison of Bracket Position Accuracy with Different CAD/CAM Indirect Bonding Systems

ABSTRACT Objective To evaluate the accuracy of three different digital bracket positioning systems, comparing vertical, mesiodistal and buccolingual accuracy. Material and Methods The same case was sent to Orapix, Insignia, and Orthocad systems and the brackets were bonded to the malocclusion models.Damon 3 MX brackets were used with all systems and the brackets were bonded to the models with the same bonding protocol and materials. The comparison of the position of each single bracket was made with digital photography, and ImageJ software was used to find the length in pixels and then convert it to hundredths of a mm for vertical, mesiodistal and buccolingual displacement, compared to the setup. Results Insignia System reported the average higher vertical displacement (0.28 mm), compared with the other two appliances (0.22-0.23 mm), and showed the lowest average displacement for the mesiodistal and buccolingual positioning (0.14 and 0.07 mm, respectively).However, these slight bracket positioning variations between these bonding systems were not statistically different (p>0.05). Conclusion The three systems analyzed were shown to be accurate in positioning the brackets, and none of them was statistically better.

Direct and Indirect Bonding Techniques: A Systematic Review

ABSTRACT Objective: To assess the scientific evidence on direct and indirect bonding techniques to analyse the differences related to treatment time, number of appointments and number of bracket detachments. Material and Methods: The MEDLINE and Cochrane Library databases were searched through to March 2021. Reference lists from the retrieved publications were also examined. The following article types that described data on the different types of direct and indirect bonding techniques in orthodontics were included: prospective and retrospective cohort studies, case-control studies and randomized controlled clinical trials (RCCTs). Two review authors independently assessed eligibility, extracted data, and ascertained the quality of the studies. Results: The search strategy initially resulted in 824 articles, and after a careful selection comprising the inclusion criteria, 12 articles were picked for the final review, specifically 2 cohort studies, 4 case-control studies and 6 RCCTs. The methodological quality was low in 4 studies, medium in 2, and high in 6 articles. Conclusion: The evidence currently available suggests that the use of computer-aided bonding is related to a reduction in treatment time and the number of appointments compared to direct and manual indirect bonding. However, the total bonding time for computer-aided bonding technique, including digital bracket placement, was longer than for direct bonding. Further high-quality RCTs on the differences between direct and indirect bonding are necessary to determine more precise data, as well as additional advantages and disadvantages.

Accuracy Assessment of Virtual Surgical Planning Comparing 3D Virtual Surgical Planning and Post-Operative CBCTs in Surgical Skeletal Class III Cases: A Retrospective Study

ABSTRACT Objective: To evaluate the accuracy of Virtual Surgical Planning (VSP) comparing VSPs and post-operative CBCT scans in patients undergoing bimaxillary orthognathic surgery of severe Skeletal Class III malocclusion. Material and Methods: Twenty-three patients (9 males and 14 females, mean age 24.1 ± 7.0 years) were selected and submitted to bimaxillary orthognathic surgery. Pre-operative VSPs and post-operative CBCTs were compared using both linear (taking into account four skeletal and six dental landmarks, each one described by the respective coordinates) and angular measures (seven planes in total). The threshold discrepancies for post-operative clinical acceptable results were set at ≤2 mm for liner and ≤4° for angular discrepancies. The mean difference values and its 95% confidence interval were identified, comparing which planned and which obtained in absolute value. Results: There were significant statistical differences for all absolute linear measures investigated, although only two overcome the linear threshold value of 2mm in both X and Y-linear dimensions. Linear deviations in Z-linear dimension do not reach statistical significance. All 12 angular measures reach the statistical significance, although none overcome the threshold angular value of 4°. Angular deviation for roll register the higher accuracy in contrast to pitch and yaw. Conclusion: Virtual surgical planning is a reliable planning method to be used in orthognathic surgery field; as a matter of fact, although some discrepancies between the planned on the obtained are evident, most of them meet the tolerability range.

Digital Assessment of Dental Parameters in Italian and Mozambican Subjects with Ideal Occlusion and Permanent Dentition

ABSTRACT Objective: To obtain reference values for tip, torque and in-out from digital models of Italian and Mozambican subjects in ideal occlusion using a repeatable and validated method and to compare these measurements with previously reported values. Material and Methods: Dental parameters were acquired from digital models of each subject, categorized to one of two groups: Italians (23 males, 27 females; mean age 28.3 years, ±5.7 years) and Mozambicans (14 males, 15 females; mean age, 23.4 years, ±5.9), using VAM software. All subjects had ideal occlusion, permanent dentition and no previous orthodontic treatment, fillings or prostheses. After normality of data was assumed (p<0.05), a paired t-test was performed to detect any statistical differences between the two groups (p<0.05). Then, classical inference (t-test and power analysis) was used to compare our data to those reported by other authors. Results: Mozambicans' incisors were more proclined, while their upper molars appeared to be more prominent regarding Italians'. Italians shown greater tip values, especially at the upper first premolars and lower first molars. In-out values were comparable between the two groups, except for the upper molars (more prominent in Mozambicans) and lower first molar (more prominent in Italians). Unlike other reports, upper second molars displayed negative tip in our samples. Conclusion: Pre-adjusted appliances with standard prescription should not be expected to guarantee optimal outcomes. Prescriptions specific for ethnicities are recommended and reference values should be reconsidered.

3D Assessment of the Correlation between Neonatal Morphology and Occlusal Outcomes in 5-Year-Old Patients with Complete Unilateral Cleft Lip and Palate

ABSTRACT Objective: To exploit 3D measurement technology to determine any correlation between neonatal palate morphology and occlusal outcomes at five years in patients receiving surgery for unilateral cleft lip and palate (CLP). Material and Methods: Twenty-nine neonatal and 5-year models treated by the same surgeon using the same protocol for CLP correction were scanned using a high-resolution structured-light scanner and stored in stl format. Dedicated software was used to make linear and surface area measurements on the neonatal models, and each digitized 5-year model was assigned a Five-Year-Old (5YO) index score on three separate occasions by the same investigator. Results: Minimum, maximum, mean, standard deviation and standard error were calculated for each variable considered, and the Pearson coefficient was used to identify any correlations between neonatal variables and 5YO scores. Linear regression analysis showed that the only variable to approach significance was the posterior width of the cleft, which showed an R2 equal to 0.111, indicating that it accounts for 11% of the variability of the 5YO index. There was no other appreciable correlation between linear measurements, surface areas, or their inter-relationships. Conclusion: There is no correlation between neonatal morphological characteristics and occlusal outcomes at 5 years in CLP patients treated via the surgical protocol considered.

Effect of Conventional Versus Passive Self-Ligating Vestibular Appliances on Torque, Tip and Transverse Dental Changes in Patients Affected by Class I Malocclusion: A Retrospective Study

ABSTRACT Objective: To evaluate the effects of passive self-ligating appliances (PSLAs) and conventional ligating appliances (CLAs) during orthodontic treatment regarding torque, tip, and transversal dental changes. Material and Methods: Dental parameters were digitally acquired from pre- and post-treatment models of each subject belonging to two groups of patients treated with PSLAs (23 patients; 11 females and 12 males with a mean age of 14.2 ± 1.6 years) and CLAs (18 patients; 10 females and 8 males with a mean age of 14.3 ± 1.9 years), respectively. All subjects had Class I or slight Class II malocclusion (= 2mm), permanent dentition and no previous orthodontic treatment. After normality of data was assumed, a paired sample t-test rejected any side differences at T0 and, therefore, the data were grouped by tooth group. Statistical analyses were performed using a linear mixed-effect framework, assuming the appliance, time, and interactions as fixed effects and the tooth type as random effects. Finally, post-hoc effect analysis was used to contrast modeled marginal effects (p<0.05). Results: For both appliances, there is a general increase of both torque and transverse values at T1, especially for PSLAs. Tip shows a general reduction in the lateral sectors for both appliances is registered. The only significant statistical difference referred to appliances' efficacy is located to mandibular intermolar width. Conclusion: Both appliances have an expansive potential for both torque and transverse dental changes. No evident differences are detectable between appliances except for the rate of the mandibular intermolar width increase.

Dentoalveolar Effects Following Maxillary Expansion: Comparison Between Dental and Skeletal Anchorage

ABSTRACT Objective: To compare the dento-alveolar effects between dental and skeletal anchored expansion devices to achieve maxillary expansion in different groups of patients: pure dental anchorage was used in growing patients and skeletal anchorage in adult patients. Linear, angular and volumetric parameters have been analysed. Material and Methods: 22 patients has been selected from the total archive of patients treated in the Orthodontics Department of the University of Ferrara, Italy, divided into 3 groups according to the appliance used to obtain the transversal maxillary correction. Digital files of the upper arch were obtained from scans performed using an intro-oral scanner before treatment (T0) and at the end of expansion (T1). Therefore, linear, angular and volumetric measurements have been performed. Results: There is a highly significant statistic variation of the 3-3, 4-4 and 6-6 diameter as a function of time. There was a statistically significant variation of the palatal vault angle and of the 6-6 distance at the cusp level as a function of time. Moreover, it appears that these parameters are reduced in the group with skeletal anchored expander. No tooth considered have encountered a statistically significant change in tip and torque values, no matter the type of RPE and the treatment time. For all patients, we have recorded the superimposition of the maxillary dental cast before and after treatment. Conclusion: In all patients, we obtained a resolution of the maxillary transverse deficit. Patients treated by pure skeletal anchored devices have recorded a less variations of palatal vault angle and the distance between first molar cusps, as if the expansion was gained more parallel. The expansion obtained showed reduced dental side effects, as tip and torque values haven't changed in a statistically significant way.

Phonetic Alterations Caused by Different Lingual Appliances

ABSTRACT Objective: To evaluate the differences in phonetic alterations caused by three different lingual appliances, all bonded in sequence on the same patients. Material and Methods: Lingual brackets (STb, Incognito and Harmony) were bonded from 1.3 to 2.3 with a 0.013 CuNiTi archwire. The text was formulated to evaluate the phonetic variations in a controlled context (logatomi) and more casual sentences. The recording of the text was performed at time t0 (before positioning the brackets), t1 (after positioning the brackets) and t2 (60 minutes after positioning the brackets). An ANOVA-type analysis was performed. Results: A significant correlation was confirmed between the effects of all the linguistic methods used compared to the absence of the same. The most influenced acoustic variables were the center of gravity of the acoustic spectrum of the analyzed sounds (CoG) and the number of zero crossings of the instantaneous amplitude curve of the considered signal. Conclusion: The effects deriving from the positioning of the various brackets were relatively contained: in some cases, for some subjects, for some consonants and in specific contexts, some brackets may occasionally be less invasive than others. However, no lingual system was systematically better than others regarding phonetic alterations.

Correlation Between Mesio-Distal Teeth Diameters and Arch Width

ABSTRACT Objective: To verify the existence of a correlation between the mesio-distal size of teeth and the arch width by analyzing the data separately for maxillary and mandibular arch in patients with ideal occlusion Material and Methods: 58 patients with ideal occlusion were studied, for a total of 276 files analyzed. Dental casts were then scanned using a professional scanner (Epson Perfection v 330) and images were obtained in TIFF format at 600 dpi. All single teeth measurements were carried out for all teeth of both arches using the VAM software (Vectra, Canfield Scientific, Fairfield, NJ, USA). The repeatability and reproducibility of the measurement method were evaluated using the Gauge R&R method. In case a correlation between tooth size and arch size is found to be significant, a linear regression analysis can be applied through the following statistical relationship: y=a+b*x, where y is the result (inter-molar distance "AvgB66" or inter-canine distance "Cusp 33"), and x the specific tooth. The a and b respectively represent the intercept (point of intersection between the line and the y axis) and the slope of the line that describes the regression ratio. Results: The statistical analysis highlights a significant correlation (p<1%) between the results of the mesio-distal measurements of each tooth and the two variables considered to define the size of each arch ("AvgB66" and "Cusp 33"). Based on these results, a numerical relationship "y=a+b*x" has been extrapolated. Thus, it is possible to calculate the estimated inter-molar or inter canine distance necessary to have the teeth aligned. Conclusion: The inter-canine and inter-molar distances can be estimated starting from measuring the mesio-distal diameter of a single tooth.

Comparative Analysis of Stiffness of Lingual Appliances: An in Vitro Study

ABSTRACT Objective: To analyze and compare the stiffness of different lingual appliances with different archwires. Material and Methods: The three-point bending test was used to analyze the stiffness of the lingual archwires for the different lingual systems: eBrace, Harmony, Incognito, and STb. The deflection load curve of each archwire was obtained to evaluate how the section, the material and the manufacturer affect the elasticity and stiffness characteristics of the wires. The comparison of the stiffness between different systems was carried out through a factor variance analysis with three factors (manufacturer, cross-section, and material), followed by the post-hoc Tuckey test. Results: An increase in the system's rigidity was reported as the wire section increases, regardless of the manufacturer. The stainless steel archwires have ever higher stiffness values than NiTi and TMA. The STb wires of CuNiTi material, by virtue of the characteristics of the thermal wires, have flatter and lower load-deflection curves than the NiTi wires of other manufacturers. Conclusion: Archwires section and material showed a significant influence on the stiffness of the lingual systems. Archwires of the same section and material but different manufacturers show different load-deflection curves of stiffness.

Spontaneous Transversal Changes of Lower Arch Following Palatal Skeletal Expansion

ABSTRACT Objective: To evaluate how the lower arch spontaneously change after upper rapid palatal expansion in a group of patients with transversal skeletal deficit. Material and Methods: Twenty-four patients treated by the same orthodontist with a rapid palatal expander (RPE) bounded on a deciduous molar have been selected. The sample was divided into two groups: no treatment was provided for group one, while group two was treated using a lip bumper or Schwarz appliance. For each patient, dental casts were collected when the RPE was bounded (T0) and at the end of treatment, 9 months ± 3 months later (T1). Each outcome was analyzed, providing descriptive statistics, main effects significance tests and post-hoc analyses with the objective to evaluate the variations between pre-treatment (TO) and post-treatment (T1) of each of them. Results: If the linear measurements are considered, a significant beneficial effect on both arches is observed. However, the upper arch always shows a major increase of all values at T1 with respect to the lower arch. Even though the post-hoc tables indicate that time differences are all statistically significant across considered partitions, the lower arch's increase is more pronounced in group two, where patients were treated in both arches. If the angular measurements are concerned, the increase of lingual crown inclination was found in all patients, independently from the type of treatment in lower arch. Conclusion: All patients show normalization of upper diameters, regardless of whether the lower arch was treated or not.